GSA Golf Panel Enclosures

Standard Stick-On Wall Panels

A fixed side wall is required to attach the panels

Please note that Velcro is no longer supplied with the panels

The panels come with peel and stick adhesive

that require a clean and smooth wall to stick to.

Should the adhesive not be strong enough for your application,

then Velcro or strong industrial adhesive should be used

Size of panels

Each panel is 10 x 24 inches (rounded)

= 240 sq inches = 1.66 sq ft

Cost per panel: $14.00

Cost per sq ft: $8.43

How to calculate how many panels you will require

1. measure the height and width of the wall (or area) you want to cover in feet

e.g. 9ft high x 10ft wide

Total sq footage is thus 9 x 10 = 90 sq ft

2. Divide the sq footage by the sq ft size of the panel

e.g. for a 24' x 10" panel that has a sq footage area of 1.66 sq ft

90/1.66 = 54 panels

e.g. for a 24" X 24" panel that has a sq footage area of 4 sq ft

90/4 = 22 panels

1 panel to cover an area of 1.66 ft

$14.00

Add quantity when checking out.

Min order 6 panels

Set of 6 panels to cover a wall area of 1.6ft X 6ft / 30" x 72"

(9.6 sq ft, $16 per sq ft)

$84.00

Set of 12 panels to cover a wall area of 3.33ft X 6ft / 40" x 72"

(20 sq ft, $16 per sq ft)

$168.00

Set of 24 panels - to cover a wall area of 40 sq ft

$336.00

Set of 36 panels - to cover a wall area of 60 sq ft

$504.00

Set of 48 panels - to cover a wall area of 80 sq ft

$672.00

Set of 60 panels - to cover a wall area of100 sq ft

$840.00

Set of 72 panels - to cover a wall area of 120 sq ft

$999.00

Actual panel size

Average single panel price is $19

Need a sample of the

Stick-On Wall Panels ?

$ 29.00

Cost of sample is refunded when making a purchase of 12 or more panels

or the sample is returned (minus shipping costs)

discounts available for larger orders

Please note

due to the constant downward pull of mounting the panels on the ceiling,

these panels require additional strong adhesive or screws when mounting on the ceiling

Also note that these panels may require additional adhesive or small screws depending on the underlying surface of side walls

How to cut the panels down to size

In order to achieve a flush finish for the area you're covering, you may have to cut the panels on the edges down to size.

For walls, this is normally only the very top or bottom panels.

For ceilings, this is normally only the very right or left panels.

The above shown method is quite fast and effective

Hi-end Acoustic fabric covered foam panels

Looking for the best panels for your enclosure?

These high quality professional panels don't just look great, they also provide excellent sound and ball deflection absorption.

Currently our number 1 seller for hi-end golf simulator enclosures

Orders include 2 inch wide Velcro mounting tape !

$60 each

($15 per sq ft)

Need a sample of the

Hi-end Acoustic fabric covered foam panel ?

$ 60.00

Cost of sample is refunded when making a purchase of 12 or more panels

or the sample is returned (minus shipping costs)

Set of 16 panels for one wall or ceiling 10ft high x 6ft wide

Price $ 960

Set of 30 panels for two walls 10ft high x 6ft wide

Price $ 1,800

Set of 26 panels for one wall 10ft x 10ft

Price $ 1,560

Set of 50 panels for two walls 10ft x 10ft

Price $ 3,000

Big discounts available for larger orders

How to cut the hi-end fabric panels down to size

In order to achieve a flush finish for the area you're covering, you may have to cut the panels on the edges down to size.

For walls, this is normally only the very top or bottom panels.

For ceilings, this is normally only the very right or left panels.

The following method is recommended for the hi-end fabric covered panels.

1. using a straight edge, mark or cut a line on to the hardboard backing where you want to cut

2. peel back the fabric covering to the line

3. cut the foam backing down to the line

4. Using a sharp knife, score the hardboard backing

5. bend the hardboard backing along the line back and forth until it breaks off

6. Wrap the fabric covering back over the new edge and secure with additional adhesive

$ 60 each

Set of 40 panels for ceiling 16ft x 10ft

Price $2,400

Set of 24 panels for ceiling16ft x 6ft

Price $ 1,440

Set of 16 panels for ceiling 12ft x 6ft

Price $ 980

Set of 24 panels for ceiling 12ft x 8ft

Price $ 1,440

2 pack panel 2ft x 2ft

Price $ 120

Low priced Foam Acoustic Panels

Set of 12 self adhesive foam acoustic panels for 12 sq ft

($3.00 per sq ft)

Price $ 36.00

Need more?

Add quantity when checking out.

Note: we can only supply these panels in sets of 12

Need a sample of the

Foam Acoustic Panels ?

$ 12.00

★ Quality - Our Acoustic Golf Simulator enclosure Foam Panels are made with flexible,

professional grade acoustic foam, made for quality sound and ball contact absorption in a variety of golf simulator enclosure projects.

The foam is dense and consistent in firmness, so acoustic and ball contact absorption performance will also be consistent.

★ Easy to Install - Acoustic Foam Panels are lightweight and can be installed to a variety of different surfaces.

No special tools are needed for installation.

Please note: Double tape/strips or glue are not included in package, and must be purchased separately.

Also note that these panels may require additional adhesive or small screws depending on the underlying surface

If attaching to the ceiling, strong adhesive or screws will always be required due to the constant down pull from gravity.

Flat Low priced High Density Acoustic Panels

Set of 12 self adhesive hi density acoustic panels for 12 sq ft

($5.50 per sq ft)

Price $ 66.00

Need more?

Add quantity when checking out.

Note: we can only supply these panels in sets of 12

Need a sample of the

Flat hi-density acoustic panels ?

$ 20.00

Cost of sample is refunded when making a purchase of 12 or more panels

or the sample is returned (minus shipping costs)

If attaching to the ceiling, additional strong adhesive or screws will always be required due to the constant down pull from gravity.

Pressed Felt Panels

($15.0 per sq ft)

Single wall panel 23 1/2" x 23 1/2" x 1" thick

Price $ 60.00

When checking out, select the number of panels you require

Need a sample of the pressed felt panels ?

High Impact pressed felt panel sample

$ 10.00

Cost of sample is refunded when making a purchase of 12 or more panels

or the sample is returned (minus shipping costs)

Need a full size 2ft x 2ft sample?

Click on ther above Single Wall panel

Single ceiling panel 23 1/2" x 23 1/2" x 1" thick $70

When checking out, select the number of panels you require

Big discounts available for larger orders

How to cut the pressed felt panels down to size

In order to achieve a flush finish for the area you're covering, you may have to cut the panels on the edges down to size.

For walls, this is normally only the very top or bottom panels.

For ceilings, this is normally only the very right or left panels.

As these panels are solid, the only way to cut them down is with a saw blade.

Essentially, you just draw a cut line on the panels and saw down the line.

The material is super easy to saw through though so shouldn't be a problem

Felt and Fabric Panel Mouting

Use Liquid Adhesive to mount fabric covered panels to the walls.

Use EZ Stick Pro to mount foam panels to the wall or ceiling.

You can also use Velcro for the fabric covered panels.

The big advantage being, you can remove them easily.

Mounting ceiling panels

Due to the constant downward pull on ceiling panels,

screws should be used to securely mount panels on the ceiling.

Compressed felt ceiling panels have recessed holes in them for this purpose.

Soft panels will absorb the screws so that they are barely visible.

New!

Golf Bays Simulator enclosures from $ 1,999.00

(click above to read more...)

Enclosure panel pricing examples

Walls and Ceiling

Golf enclosure size 16ft wide x 9ft high x 10ft wide

2 walls 10 x 9 = 90 sq ft x 2 = 180 sq ft

Ceiling 10 x 16 = 160 sq ft

Total sq ft required =

340 sq ft

If using Hi end fabric covered panels at

$15 per sq ft

Total price is : $15 x 340 =

$ 5,100

If using Hi end felt pressed panels at

$17.5 per sq ft

Total price is : $17.5 x 340 =

$ 5,950

If using the lower priced Velcro stick on panels at

$10.50 a sq ft

Total price is : $10.50 x 340 =

$3,570

If using the low priced stick on panels at

$5.50 a sq ft

Total price is : $5.50 x 340 =

$1,870

Alternatively you can use our super heavy sound and light absorbing drapes.

Set of 2 wall drapes 10ft x 10ft with tracks and rollers is

$1,499

for the 2 set

Ceiling drape 17ft x 10ft is

$799

Total price is

$2,299

Enclosure panel pricing examples

Walls only

Golf enclosure size 17ft wide x 10ft high x 10ft wide

2 walls 10 x 9 = 90 sq ft x 2 = 190 sq ft

Total sq ft required =

190 sq ft

If using Hi end fabric covered panels at

$15 per sq ft

Total price is : $15 x 190 =

$ 2,850

if using the pressed felt panels at

$17.7 per sq ft

Total price is : $17.5 x 190 =

$3,225

If using the lower priced Velcro stick on panels at

$10.50 a sq ft

Total price is : $10.50 x 190 =

$1,995

If using the low priced stick on panels at

$5.50 a sq ft

Total price is : $5.50 x 190 =

$1,045

Alternatively you can use our super heavy sound and light absorbing drapes.

Set of 2 wall drapes 10ft x 10ft with tracks and rollers is

$1,499

for the 2 set

VISTRAK

VisTrak hi-speed camera Launch Monitors from $ 1,999.00

Click above images to read more...

PROTEE VX

Currently the world's most advanced hi-speed tracking system

$ 6,499.00

This ceiling mounted, camera based system accurately measures club and ball data

without the need for specialty balls or marked clubs !

Click above images to read more...