Xcam Golf Launch Monitors

A single Xcam can be used a floor mounted system to create an LX1/Vcam or ceiling mounted to create an Eagle system

When purchasing a second Xcam, a full SCX, EVi or LX2 system can be created

Xcams come complete with 24 LED IR narrow beam lights, interchangeable lenses, power supply, 40ft USB3 cables plus ceiling and floor mounts.

No subscription fees!

No specialty propriety balls required!

Use any ball with a logo on it or TM Pix balls

Fully upgradeable!

Add a second Xcam camera at anytime

Fully modular!

You can convert any Xcam camera system to any configuration you like

i.e. a ceiling mounted system (SCX or Eagle)

a split floor and ceiling mounted system (EVi)

an all floor system (LX1 or LX2)

or a Swing Capture system

Multiple systems in one

In contrast to all other launch monitors on the market that are fixed to single camera configuration setup,

the Xcam series allows you to change up to 6 different camera configurations

Affordability

Start with just one camera and add more as and when requirements and/or finances allow

All shots detected. From full drives to chips and putts with shot replay 32 frame videos.

Xcam series of launch systems detect all shots including putts!

Xcam ceiling camera shot

Xcam side camera shot

Xcam Launch Monitor

Xcams come complete with 24 LED IR narrow beam lights, interchangeable lenses,

power supply, 40ft USB3 cables plus ceiling and floor mounts.

Price $1,299

Non credit card cash price

$999

Contact us for your invoice

Xcam floor mounted

Measured Data captured when using a single floor mounted Xcam:

Ball speed, Ball Vertical Launch angle, Ball Spin

Xcam ceiling mounted

The Vistrak Xcam can be mounted on the ceiling when in VisTrak Eagle mode

Measured Data when using a single ceiling mounted Xcam

Club face angle, club path, club speed and Ball Path and Spin

Dual Xcam configurations

Xcam stereo ceiling mounted - SCX

Xcam ceiling and floor mounted - EVi

Data captured: Ball speed, ball launch angle, ball path and ball spin rate plus

Club face angle, club path and speed

.

The Xcam EVi shows shot replay videos from both the top and side view cameras during game play

Xcam Swing Capture

When used with wide angle lenses and additional lighting,

the Xcam cameras can be used as a Swing Capture system

Xcam club detection

All Xcam models function with E6, GS Pro, CG3 and TGC (and more) game software packages.

Xcam

post shot videos

Great for evaluation with the GSA Golf Control Panel - playable with the mouse.

Xcam compatible Game software

Game software options

--

-

-

Click above images to read more ...

GSA Golf VisTrak cameras function with all the above golf simulator course software

Please note that if you already own any of the above software systems and it was licensed for a tracking system other than GSAgolf

then you will have to contact the respective software company to have your license converted to GSA Golf systems.

Free Game software

GSA Golf 18 hole course game software included free of charge

Accuracy

VisTrak LX vs GC2 comparison results

Just in from independent tester Phil in the UK that has a GC2 and is running comparison tests with his VisTrak system

Putting

Vistrak 12.99 mph, GC2 13.0 2 mph

Vistrak 6.36 mph, GC2 6.0 3 mph

Vistrak 16.5 mph, GC2 17.3 mph

Chipping

Vistrak 49.73 mph, GC2 49.2

Full shots

Vistrak 80.37 mph , GC2 78.9 2 mph

Vistrak 78.63 mph , GC2 79.8 3 mph

Vistrak 87.22 mph, GC2 88.0 mph

GSA Golf system minimum PC requirements

Intel i5 or above Processor with a desktop gaming PC

Warning! Do not use PC's with AMD processors or low cost Laptops!

Warning! Do not use custom made PCs

Only use stock PC's

i.e. those that are available on Amazon in the $1,000 to $1,500 plus range

Our experience over the years has shown that the USB speeds with

custom made PCs do not meet the camera USB requirements.

8GB RAM Nvidia 1070 Graphics Card or equivalent

25GB of Hard Drive Space

Windows 10 or 11 (Required)

Internet Connection

(Required if using 3rd party game software such as E6, TGC or GSPro)

2 x USB3.1 or 2 x USB3.2 ports (Required)

Note: The cameras are USB3 cameras

and will only run at the correct speed when connected via USB3 cables directly to separate USB3 ports on the PC

Warning

If using 2 cameras, do not connect the cameras together with a Hub !

All cameras must be directly connected to separate USB3 ports on the PC

Use only the supplied powered USB3 extension cables

Warning! Do not use older PC's that have been modified in anyway

(i.e. new mother board, additional USB3 cards etc)

Experience has shown that the high-speed cameras do not function with such older or modified PCs

Note: The Xcam is for indoor use only and requires a connection to a 110/120v power outlet

and 2 USB3 camera cables connected to the PC

Technical Support

Email and remote access support is available for all original purchasers of GSA Golf systems.

GSA Golf reseller inquirers welcome

Contact me - Martin - for details

Tel: 239 529 3060

International customers - Outside the US - Please note!

Please note: GSA Golf is not responsible for any import customs duties or brokerage fees that may be due for your order when arriving at the border.

All such customs duties and brokerage fees must be paid by the recipient.

There is also an additional $100 to $300 shipping charge

(depending on your country and weight of the product) for any product exported outside the US.

Warranty and Return Policy

Camera Warranty: 1 year

Return policy:

Returns must be made within 30 days and have a 15% to 20% restocking fee

Please read our legal notice via the link below regarding warranty periods and return policy

Note that a 15% to 20% re-stocking fee (depending on condition) will be charged in the event of a return

Customer is required to return the product at own expense. ie, GSA Golf do not send free return labels

Note: this 30 day return policy does not include 3rd party game software such as TGC,

enclosure items such as screens, flooring, drapes, panels etc.

i.e. it is solely for camera tracking systems

Please read our legal notice via the link below regarding warranty periods and return policy